Go to Home  
Home | Sitemap | Career
  Home    Products
Share |
  Product List
Air Scrubber  
NGBPS’s ClassicAir specializes in removal of harmful gases from critical environments like Data Cneters. ClassisAir systems have been proven to dramatically reduce electronics failure where high level of air pollutants exists.

The ClassicAir is a complete self contained, horizontal or vertical airflow packaged cell system.

It provides continuous high efficiency air purification for low level contaminated air streams ranging in volume from 500 to 4000 CFM. These systems are typically used in free standing applications where fine purification of the air in a room is needed.

These system are most often used in computer rooms as polishing filters to provide added assurance of air quality

Systems & Modules  
Stand Alone Systems
ClassicPak module
Absorbent Media  
For removal corrosive gasses
For removal of corrosive odour gasses
For removal of Hydrogen Sulphide
For removal of Amines and other base compounds such as  ammonia
For removal of Chlorine
ClassicPak Disposable Module  
The ClassicPak was developed to provide our customers with a method to quickly, cleanly change the media in their air purification systems. This disposable cartridge is designed especially for computer room applications. It can be filled with any of our superior adsorbent media.
Product Features  
Factory filling assures no air bypass of media
Reduced time to change purification system media
Creates less mess than bulk media refilling
Filled with your choice of Pure Air media
100% recyclable

Pressure Drop: 1.3 IWG @ 250 ft/min, (325 Pa @ 1.25 m/s)
Media Bed Depth: 3" (75 mm)
Nominal Size: Half Sized Cartridges (Sold in pairs), 12 x 12 x 24 inches per set, (152x 152 x 305 mm)
Media Volume: 1 cubic foot (0.03 cubic meters)
98% efficient gas removal

High Capacity ClassicAbsorb Adsorbent Media
ClassicAbsorb has been designed to have roughly twice the absorbent capacity of standard media.
This second generation absorbent media was developed in order to provide customers with the maximum absorbtion benefit at the minimum cost.
ClassicAbsorb targets a broad range of gases which cause corrosion, odor and other undesirable gases.
ClassicAbsorb starts with the highest grade activated alumina. This ensures that the greatest possible adsorption capacity is reached. This alumina is then impregnated with potassium permanganate while being formed into a pellet. NGBPS adds a proprietary additive during the process in order to keep all eight percent of the permanganate available for reaction.


General Description: Spherical or cylindrical porous pellets formed from a combination of powdered activated alumina and other binders, suitably impregnated with potassium permanganate to provide optimum adsorption, absorption, and oxidation of a wide variety of gaseous contaminants.
Removal Capacity:
Hydrogen Sulfide: 14% min by weight
Sulfur Dioxide: 7% min by weight
Nitric Oxide: 5% by weight
Formaldehyde: 2.5% by weight
Manufacturing Quality Assurance Standards:
Leach Test (indication of porosity)- 180 minute or less
Permanganate Content: 8% minimum
Moisture Content: 20% maximum
Crush Strength: 10 lb min
Abrasion Loss: 3% maximum
Nominal Pellet Diameter: 1/8” (approximately 4 mm), 85% after screening
Nominal Density: 50 lbs/ft3 (0.80 g/cc)

Media Remaining Life Testing:
NGBPS provides free quarterly media testing for the life of the media installation. This testing provides critical data including remaining permanganate content, total life prediction, moisture content, and projected replacement date. Data is provided for each of the separated components of a blend. All analyses are performed at our certified laboratory.

UL Rating: ClassicAbsorb meets the requirements of a UL Class 1 fire rating
 About NGBPS  Products  Services  Partner  Download Newsroom
Copyright @ 2010, NGBPS Ltd. All rights reserved | Privacy Policy Design & developed by: Mindkey