Go to Home  
Home | Sitemap | Career
 
 
 
  Home    Products
Share |
  Product List
 
 
NGBPS LIMITED is the exclusive partner for the TTK Digital Water Leak detection Systems of France.  
 
Digital Water Leak Detection Systems  
 
One the most advanced solutions on the market, the System sounds an alarm in the unlikely event of a water leakage in the under floor and also points out the exact location of the leak. The system is extremely robust and even in the event of a sensing cable break the remaining cable works normally indentifying leaks if any.
Watch Video
Digital & Alarm Units  
The FG-SYS digital unit is designed to be used with TTK digital liquid sensing cables FG-EC, FG-ECS (with FG-DTCS box), FG-AC and FG-HC2. The presence of a liquid on the sensing cable activates a luminous and audible alarm, displays the localization of the initial point of the leak to the nearest metre.
The FG-SYS digital unit can control from 1 to 120 lengths of sensing cables independently and indicate for each one the type of defect.

FG-SYS is able to be used with TTK digital liquid sensing cables: FG-EC, FG-AC and FG-HC2, FG-ECS (combien with FG-DTCS). Each length of sensing cable or digital sensor can be programmed and gives a specific designation of the room or floor inherent to each installation. In the event of a leak, an audible alarm is triggered, the zone indicator light changes to red, the dry contact is activated and the display shows the time, date the fault starts, type of fault (leak or circuit interruption), zone designation and distance in metres from the origin of the leak. FG-SYS digital unit is totally compatible with existing operating systems. There are eight, entirely configurable dry contacts available, RS232 and RS485 serial links with MODBUS communication protocol for interfacing with executive, and streamline printing. These are the communication tools which enable the users to use all detection and alarm information in the best possible manner.
 
Sense Cables  
 Water and Bases Sense Cables

FG-EC digital sense cable detects with localization the presence of water and bases in metric mode. It is connected to the FG-SYS digital unit. It exists in three lengths of 3, 7 and 15 metres.

 
FG-ECS digital sense cable detects with localisation the presence of water and bases in sector mode. It is connected to the FG-SYS digital unit via a FG-DTCS box; or connected to the FG-A alarm directly. It exists in three lengths of 3, 7 and 15 metres.
 
FG-ECX sense cable detects without localisation the presence of water and bases in metric mode. It is connected to the FG-A alarm directly. It exists in three lengths of 3, 7 and 15 metres.
 
 Acids Sense Cables
FG-AC digital sense cable detects with localisation the presence of acid in metric mode. It is connected to the FG-SYS digital unit. It exists in three lengths of 3, 7 and 15 metres.
 
  Hydrocarbons & Solvents Sense Cables
FG-HC2 digital sensing cable detects and localizes the presence of hydrocarbons and solvents. Connected to one of the modular central FG-A alarm or FG-SYS digital units. It exists in a standard length of 2 m.
 
Accessories  
Belden™ jumper cable (reference 8723 LSZH) for connecting two sensing cables in a none risk area; available in preconnected lengths of 3, 7 and 15 metres.

Leader cable in 3,5 metres length for connecting sensing cable to the digital unit.

Diversion box for "T" branch connecting two sensing cables.

Diversion box in sector mode, to connect a FG-ECS sensing cable.

Modular end termination plug is used to terminate each circuit of sensing cables.

Set of 100 hold down clips with adhesive (cold glue) to fix sensing cable lengths.

Set of 40 signal tags.

Download the Brochure

Sense cable datasheet
FG-SYS
 
 
 
 About NGBPS  Products  Services  Partner  Download Newsroom
         
Copyright @ 2010, NGBPS Ltd. All rights reserved | Privacy Policy Design & developed by: Mindkey